Sales & Installation

Sales & Installation NSW Hot Water

We sell, deliver, install and service all categories of hot water heaters. Ranging from gas and electric storage, gas and electric instantaneous, heat pump, solar and commercial heaters.

 

SALES & DELIVERIES

We can provide you with the sale of any hot water heating system you require, we can also assist you in what system and capacity is required if need be. Your purchase can be either picked up from us direct or we can have it delivered for you FREE OF CHARGE. All deliveries nation-wide are free of charge.

Purchases can be made online, in person or over the phone.

We accept all major credit cards, EFT and cash.

REPAIRS

General repairs can result in the replacement of the following;

Thermostats, elements, all water and gas isolation valves, tempering valves, anodes, temperature & pressure relief valves, limiting valves, check valves, non-return valves, thermocouples, gas control valves, piezo and many more parts. You will be instructed on what is required prior to the work being completed.

Our team of specialist will be able to diagnose your hot water problems based on a series of questions you are asked, once answered our specialist can then begin to test your unit, diagnose all issues and offer you a resolution in layman’s terms so that you have a good understanding of the situation.

INSTALLATIONS

All installations provided by NSW Hot Water are compliant to AS/NZS 3500.4:2015 Plumbing and drainage Heated water services and all other relevant codes and legislations.

• All new installations will consist of either a Tempering valve or Thermostatic mixing valve to control the temperature hot water.

• In Australian the Maximum water temperature to a sanitary fixture is 50 Degrees and 45 Degrees for the aged, the sick, children or people with disabilities in healthcare and aged care buildings, early childhood centres, primary and secondary schools and nursing homes or similar facilities for the aged, the sick, children or people with disabilities.

• All our installations will consist of thermal insulation to all piping and valves.

Please note if your existing hot water heater has not been fitted with a tempering valve, we are required to install your new heater with one, this will incur an additional cost as it will not be a like for like installation.

Up to

50% Off

Selected Products
Shop Now!